induced charge การใช้
- As the water droplet is very conductive the induced charges will reside on the surface.
- The charge is held in the top of the electroscope terminal by the attraction of the inducing charge.
- The quantity of induced charges in the electrodes are thus reduced, resulting in a flow of electrons.
- The induced charge is distributed over several electrodes for the large distance in a multi-segmented detector.
- The total magnitude of the polarization is increased and the amount of induced charges in the electrodes are increased.
- However, surface charge is but one component of surface energy, and other components are certainly perturbed by induced charge.
- The field of the induced charges exactly cancels the field from " C " throughout the interior of the metal.
- Transient, randomly induced charges exist across non-polar covalent bonds of molecules and electrostatic interactions caused by them are referred to as Van der Waals forces.
- If a problem in electrostatics is solved by using the method of image charges, the induced charge on the conductor is always equal to the image charge.
- For the closer distance an increase and decrease of induced charges of the electrodes continue until the primary charge finally reaches to its destination electrodes and neutralizes the image.
- But when the inducing charge is moved away, the charge is released and spreads throughout the electroscope terminal to the leaves, so the gold leaves move apart again.
- The machine is theoretically not self-starting, meaning that if none of the sectors on the discs has any electrical charge there is nothing to induce charges on other sectors.
- If the induced charge was different from the one in the solution than the solution wouldn't be a solution . talk ) 00 : 41, 13 December 2011 ( UTC)
- As the charges in the metal separate, the resulting regions of induced charge on the surfaces of the metal container create their own electrostatic field, which opposes the field from " C ".
- If we assume for simplicity ( without loss of generality ) that the inner charge lies on the z-axis, then the induced charge density will be simply a function of the polar angle & theta; and is given by:
- With such structures, two patterned triboelectric surfaces can get to fully mismatching position through a displacement of only a grating unit length rather than the entire length of the TENG so that it dramatically increase the transport efficiency of the induced charges.
- In a logic circuit, Q crit is defined as the minimum amount of induced charge required at a circuit node to cause a voltage pulse to propagate from that node to the output and be of sufficient duration and magnitude to be reliably latched.
- When alternate positive and negative charges are induced on adjacent electrodes, the resulting electric field sets up opposite charges on the surface that the pad touches, and thus causes electrostatic adhesion between the electrodes and the induced charges in the touched surface material.
- Since the sum of these two charges is zero, the induced charge on the inside surface of the shell must have an equal but opposite value to the charge on C : " Q induced " = " " Q ".
- The essential features of the Pidgeon machine are, one, the combination of the rotating support and the fixed support for inducing charge, and, two, the improved insulation of all parts of the machine ( but more especially of the generator's carriers ).
- ตัวอย่างการใช้เพิ่มเติม: 1 2